Geuther Oris 2732+ Screw-Fit Stair Gate 58-93 cm

Quick take
The narrowest Oris section protects standard door frames and straight stair heads between 58 and 93 cm without adding a threshold.

Why it’s handy

• Wall-to-wall or wall-to-banister install with rock-solid screw-fit brackets.
• Full-height swing door provides a 50 cm walk-through even when you’re carrying laundry baskets.
• Solid beech rails with rounded edges and child-safe lacquer in four colours.
• Integrated level marks and adjustment screws help you square the gate even on old walls.

Dimensions & spec

• Width range: 58–93 cm; height: 83 cm.
• Bar spacing: 5.4 cm; door swings both directions.
• No bottom bar — safe for stair tops and nightly bathroom trips.

Installation tips

• Pre-drill 6 mm holes for masonry plugs; use the supplied banister clamps on timber posts.
• Always tighten both safety screws on the latch plate to stop little hands from lifting it.

Included hardware

• 1× Geuther Oris 2732+ gate
• Hinge and latch plates + covers
• Banister clamps, screws, plugs and instructions